Tutorial: DIY Cord Keeper From Fabric Scraps

DIY-Cord


Am I the only one that has a basket full of charging cords?  It seems that everything has it’s own charging cord, and all of the cords turn into a jumbled mess in the basket.  I decided that some nice little cord keepers were in order.  All you need is a couple of scraps of fabric, some medium weight interfacing, about an inch of velcro, and about 20 minutes.  These make up really quickly, and are the perfect quick project to use up the last bits of your favorite fabrics. As a bonus, they make a perfect gift for anyone and any occasion.  I made up a couple sets of these for Mother’s Day, but they’d make great stocking stuffers as well.

DIY-Cord

Wouldn’t these be so nice to keep your chargers nice and tidy in a bag or suitcase?

DIY-Cord

Print off the Cord Keeper Template. Apply medium weight fusible interfacing to the back of one piece of scrap fabric. Cut one piece of interfaced fabric with the template, and one without. You will need 2 total pieces of fabric for each cord keeper. Cut two small 1 inch pieces of velcro.

DIY-Cord

Place the two fabric pieces with right sides together.  Stitch around the fabric pieces, 1/4″ from the raw edges, leaving 2 inches or so open for turning.  Clip the corners close to the stitching line.  Notch the two curved ends of the cord keepers.

DIY-Cord

 Turn the cord keepers right side out through the open space.  Press.  Stitch 1/8″ away from the pressed edges, to both secure the layers, and close off the open turning space.

DIY-Cord

Attach the velcro pieces to either end of the cord keeper.  One side should go on the front, and one on the back.

DIY-Cord


Wrap around your cords and chargers to keep things nice and tidy.  Who doesn’t like a bit of organization?

Source: leafytreetopspot.blogspot.com

Leave a Reply

Your email address will not be published. Required fields are marked *